Alu putty styrene-containing

presto Aluminium Putty "styrene-containing" is a 2-component polyester filling putty with different mineral, environment-friendly fillers and aluminium pigments. Applicable as filling compound for car repair, engine construction and for hobby works. Everywhere, where a large-area spreading is desired.

  • light grey
  • 250 G | 1,00 KG

Amazon Go to shop

Characteristics

  • Highly thixotropic, therefore very easy wide-spread and pore-free application
  • Very good adherence
  • Easy processing
  • High elasticity
  • Easy to sand
  • Short curing time
  • Free of asbestos and silicone
  • Resistant to weak acids and bases, propellants, solvents, water and de-icing salt

Technical Data Sheet

Safety data sheet(s)

Usage instructions

Before use, carefully read and follow the instructions on the packaging.

  1. The area to be repaired should be derusted, clean, dry, free of grease and sanded.
  2. As a primer before and after filling we recommend the presto Epoxy Primer (please note the drying time).
  3. Take the required amount of material from the can and mix it well with the corresponding quantity of hardener.
  4. Apply the mixed material in the desired layer thickness.
  5. After approx. 30 minutes the repaired spot can be drilled, sanded, sawed, rasped and painted.
  6. Clean tools immediately after use, if necessary with a nitro thinner.
  7. Do not return mixed material into the can.

Choose your language