Before use, carefully read and follow the instructions on the packaging.
Remove rust, oil and grease from the surface to be painted.
Then thoroughly sand resp. sandblast; the surface has to be blank to the bare metal!
The ground has to be dry and free from dust and fat.
No primer necessary. The best results will be achieved on bare metal!
Stir up vigorously before use.
Apply with a fine artist's brush 1-2 thin coats. Let dry. Important: the thinner the paint coat, the better the temperature-resistance and the adhesion will be.
Stoving for approx. 30 minutes at 160 - 200°C is condition for curing and thus for the full resilience of the paint coat (heat-resistance and fuel-resistance!).
